Bosch Facility EN

Navigation help

Reference identifier Bosch Facility

This landing page (navigation help) documents all relevant definitions, standards and specifications for the Bosch Facility Equipment Identification Key and the file naming convention.

Project description

These regulations apply to all trades and their documents and markings. At the start of the project, these are made available to the planning departments and, if necessary, adapted / extended for the project. At the respective project start, reference is made to a version of the EIK and the file release. It can be permanently retrieved in this status and compared with the current status.

Project manager Bosch:

• Christian Bruns
• Jan-Lukas Gehl
• Thomas Sigloch
• Thomas Walter

Project manager external:

• Michael Kastl / ibKastl GmbH
• Johann Weiher / ibKastl GmbH

Versioning

Version history of pages:

• Versions in MediaWiki
• Version comparison in MediaWiki

Version EIK (equipment identification key)

• EIK_1.3 (2023-08) EN
• EIK_1.2 (2023-02) EN

Version FNC (file naming convention)

• FNC_1.4 (2024-02) EN
• FNC_1.3 (2023-08) EN
• FNC_1.2 (2023-02) EN

Dokumentation

Structural changes

• File naming convention has been significantly simplified (2024-02)
• +Location - Aggregates / cabinets > Expanded and new designations (2023-08)
• == Functional assignment > Fundamental changes (2023-08)
• = Function > Fundamental changes (2023-08)
• ==L - Automation system > Grouping introduced (2023-07)
• =KH - Transformer system > Voltages adjusted (2023-06)
• =JK - Power distribution system > Voltages adjusted (2023-06)
• =HG - Power supply system > Voltages adjusted (2023-06)
• +Location - Digits counter > Third level added to the counter (2023-05)
• =JK - Power distribution system > Grouping introduced (2023-04)

... all changes

Further instructions

• Specifications for control cabinets
• Basic project EPLAN 2023

Bosch Equipment Identification Key

Overview

• Reference identifier (EIK)
• Examples

Structure

• Installation site (++)
• Functional assignment (==)
• Function (=)
• Mounting location (+)
• Product (-)

Further information

• Page
• Data point

Bosch file naming convention

Overview

• File naming convention
• Examples

Structure

• Installation site (++)
• Functional assignment (==)
• Document type
• Grid square reference
• Contractor Index
• Free text

Attribute

• Status
• Index

Reference identifier (EIK)

Definition

++ Installation site == Functional assignment = Function + Mounting location - Product

Example compressor compressed air

++RT.141B.L01.AC35==E001.101=HA065.01+UFF-GQA1

File naming convention

The current status of the file naming convention is documented here. You can find the older version via the version FNC 1.4 (2024-02) EN. ATTENTION: The projects Rt141b-Rt144a-Rt146 and Rt315-Rt842-Rt843 still use the old version.

Definition

Installation site _ Functional assignment _ Document type _ Grid square reference _ Contractor Index _ Free text / Page

Example data sheet compressor air

RT_141B_L01_E001_PEC_10_004_COMPRES

EPLAN-Template

Documentation

• Basic project EPLAN Bosch Facility
• EPLAN Templates Bosch (Category)

eVIEW

EPLAN eVIEW

Bosch EPLAN-Template (Version 21)

Applied standards

Document type

• EN 61355 Rules and tables for classification

Structuring

• IEC 81346-1 General rules Draft
• IEC 81346-2 Classification of objects and identification letters for classes NEW: 2020-10
  • IEC 81346-2 Classification scheme for inherent function of objects
  • IEC 81346-2 Classification of rooms
• ISO 81346-12 Buildings and technical building equipment
  • ISO 81346-12 Functional system classes#Classes of functional systems based on inherent functions
  • ISO 81346-12 Functional system classes#Classes of technical systems based on inherent functions

Data point

• DIN EN 61175 Marking of signals

Status

released

This article is released and valid.

in process

This article is currently under construction.

outdated

This article is obsolete or has been withdrawn.

Definitions

• Bosch
  • EIK = Equipment identification key
  • FNC = File naming convention
• Structure (standards)
  • Installation site (++) = This indicator block is used to identify local locations.
  • Mounting location (+) = This indicator block is used to identify the installation locations of technical objects.
  • Functional assignment (==) = This indicator block is used for function-related structuring from the point of view of the interaction (dynamic effect) of technical objects. It is used to identify relationships between functions, technical equipment and operating resources.
  • Function (=) = This indicator block is used for function-related structuring from the perspective of task and purpose (static tasks) of the technical objects.
  • Product (-) = This indicator block is used for product-oriented labeling of electrical and mechanical objects.
• Terms (standards)
  • Aspect = Specified way of viewing an object.
  • Identifikator = Attribute that is assigned to an object in order to distinguish it unmistakably from other objects in a defined scope.
  • Referenzkennzeichen = Identifier of a specific object, formed in relation to the system of which the object is part, based on one or more aspects of the system.
  • Structure = Organization of relations among objects of a system describing constituency relations (consist-of/is-a-part-of).

Weblinks

• bosch.com