Bosch Facility EN: Unterschied zwischen den Versionen

Aktuelle Version vom 15. Mai 2024, 06:55 Uhr

Navigation help

Reference identifier Bosch Facility

This landing page (navigation help) documents all relevant definitions, standards and specifications for the Bosch Facility Equipment Identification Key and the file naming convention.

Project description

These regulations apply to all trades and their documents and markings. At the start of the project, these are made available to the planning departments and, if necessary, adapted / extended for the project. At the respective project start, reference is made to a version of the EIK and the file release. It can be permanently retrieved in this status and compared with the current status.

Project manager Bosch:

Christian Bruns
Jan-Lukas Gehl
Thomas Sigloch
Thomas Walter

Project manager external:

Michael Kastl / ibKastl GmbH
Johann Weiher / ibKastl GmbH

Versioning

Version history of pages:

Version EIK (equipment identification key)

Version FNC (file naming convention)

Dokumentation

Structural changes

File naming convention has been significantly simplified (2024-02)
+Location - Aggregates / cabinets > Expanded and new designations (2023-08)
== Functional assignment > Fundamental changes (2023-08)
= Function > Fundamental changes (2023-08)
==L - Automation system > Grouping introduced (2023-07)
=KH - Transformer system > Voltages adjusted (2023-06)
=JK - Power distribution system > Voltages adjusted (2023-06)
=HG - Power supply system > Voltages adjusted (2023-06)
+Location - Digits counter > Third level added to the counter (2023-05)
=JK - Power distribution system > Grouping introduced (2023-04)

... all changes

Further instructions

Bosch Equipment Identification Key

Overview

Structure

Further information

Bosch file naming convention

Overview

Structure

Attribute

Status
Index

Reference identifier (EIK)

Definition

++ Installation site == Functional assignment = Function + Mounting location - Product

Example compressor compressed air

++RT.141B.L01.AC35==E001.101=HA065.01+UFF-GQA1

File naming convention

The current status of the file naming convention is documented here. You can find the older version via the version FNC 1.4 (2024-02) EN.

ATTENTION: The projects Rt141b-Rt144a-Rt146 and Rt315-Rt842-Rt843 still use the old version.

Definition

Installation site _ Functional assignment _ Document type _ Grid square reference _ Contractor Index _ Free text / Page

Example data sheet compressor air

RT_141B_L01_E001_PEC_10_004_COMPRES

EPLAN-Template

Documentation

eVIEW

EPLAN eVIEW

Bosch EPLAN-Template (Version 21)

Applied standards

Document type

EN 61355 Rules and tables for classification

Structuring

IEC 81346-1 General rules Draft
IEC 81346-2 Classification of objects and identification letters for classes NEW: 2020-10
- IEC 81346-2 Classification scheme for inherent function of objects
- IEC 81346-2 Classification of rooms
ISO 81346-12 Buildings and technical building equipment
- ISO 81346-12 Functional system classes#Classes of functional systems based on inherent functions
- ISO 81346-12 Functional system classes#Classes of technical systems based on inherent functions

Data point

DIN EN 61175 Marking of signals

Status

released

This article is released and valid.

in process

This article is currently under construction.

outdated

This article is obsolete or has been withdrawn.

Definitions

Bosch
- EIK = Equipment identification key
- FNC = File naming convention
Structure (standards)
- Installation site (++) = This indicator block is used to identify local locations.
- Mounting location (+) = This indicator block is used to identify the installation locations of technical objects.
- Functional assignment (==) = This indicator block is used for function-related structuring from the point of view of the interaction (dynamic effect) of technical objects. It is used to identify relationships between functions, technical equipment and operating resources.
- Function (=) = This indicator block is used for function-related structuring from the perspective of task and purpose (static tasks) of the technical objects.
- Product (-) = This indicator block is used for product-oriented labeling of electrical and mechanical objects.
Terms (standards)
- Aspect = Specified way of viewing an object.
- Identifikator = Attribute that is assigned to an object in order to distinguish it unmistakably from other objects in a defined scope.
- Referenzkennzeichen = Identifier of a specific object, formed in relation to the system of which the object is part, based on one or more aspects of the system.
- Structure = Organization of relations among objects of a system describing constituency relations (consist-of/is-a-part-of).

Weblinks

bosch.com

@@ Zeile 4: / Zeile 4: @@
 <!-- flex-item 1 -->
 <div style="flex: 1.9 1 0%; text-align: center">
-<div class="container ibkastl">
+<div class="container ibkastl" style="margin-bottom: 0px; padding-top: 0px;">
 == Reference identifier Bosch Facility ==
 <br>
@@ Zeile 13: / Zeile 13: @@
 </div>
-<div class="container ibkastl">
+<div class="container ibkastl" style="margin-bottom: 0px; padding-top: 0px;">
 <div class="flex" style="align-content:center; align-items:center;">
 <!-- —————————— —————————— —————————— flex-subitem —————————— —————————— —————————— -->
@@ Zeile 45: / Zeile 45: @@
 </div>
-<div class="container ibkastl">
+<div class="container ibkastl" style="margin-bottom: 0px; padding-top: 0px;">
 <div class="flex" style="align-content:center; align-items:center;">
 <!-- —————————— —————————— —————————— flex-subitem —————————— —————————— —————————— -->
@@ Zeile 58: / Zeile 58: @@
 <div style="flex: 1 1 0%; text-align: left">
 <div>
-=== [[:Kategorie:Versioning EIK|EIK Version]] ===
+=== [[:Kategorie:Versioning EIK|Version EIK (equipment identification key)]] ===
+*[[EIK_1.3 (2023-08) EN]]
 *[[EIK_1.2 (2023-02) EN]]
 </div>
@@ Zeile 66: / Zeile 67: @@
 <div>
-=== [[:Kategorie:Versioning File naming convention|FNC Version]] ===
+=== [[:Kategorie:Versioning File naming convention|Version FNC (file naming convention)]] ===
+*[[FNC_1.4 (2024-02) EN]]
+*[[FNC_1.3 (2023-08) EN]]
 *[[FNC_1.2 (2023-02) EN]]
 </div>
@@ Zeile 74: / Zeile 77: @@
 </div>
-<div class="container ibkastl">
+<div class="container ibkastl" style="margin-bottom: 0px; padding-top: 0px;">
 <div class="flex" style="align-content:center; align-items:center;">
 <!-- —————————— —————————— —————————— flex-subitem —————————— —————————— —————————— -->
 <div style="flex: 1.7 1 0%; text-align: left">
-== Structural changes ==
+== Dokumentation ==
+<div class="flex start">
+<!-- flex-item 1 -->
+<div style="flex: 1 1 0%; text-align: left">
+<div>
+=== Structural changes ===
+*[[File naming convention Bosch Facility|'''File naming convention''']] has been significantly simplified (2024-02)
+*[[Mounting location Bosch Facility|'''<nowiki>+</nowiki>Location''' - Aggregates / cabinets]]  > Expanded and new designations (2023-08)
+*[[Functional assignment Bosch Facility|'''<nowiki>== Functional assignment</nowiki>''']] > Fundamental changes (2023-08)
+*[[Function Bosch Facility|'''<nowiki>= Function</nowiki>''']] > Fundamental changes (2023-08)
+*[[Functional assignment Bosch Facility#L - Automation system|'''<nowiki>==L</nowiki>''' - Automation system]] > Grouping introduced (2023-07)
+*[[Function Bosch Facility#KH - Transformer system|'''<nowiki>=KH</nowiki>''' - Transformer system]] > Voltages adjusted (2023-06)
+*[[Function Bosch Facility#JK - Power distribution system|'''<nowiki>=JK</nowiki>''' - Power distribution system]]  > Voltages adjusted (2023-06)
+*[[Function Bosch Facility#HG - Power supply system|'''<nowiki>=HG</nowiki>''' - Power supply system]] > Voltages adjusted (2023-06)
 *[[Mounting location Bosch Facility|'''<nowiki>+</nowiki>Location''' - Digits counter]]  > Third level added to the counter (2023-05)
 *[[Function Bosch Facility#JK - Power distribution system|'''<nowiki>=JK</nowiki>''' - Power distribution system]]  > Grouping introduced (2023-04)
-*[[Function Bosch Facility#KH - Transformer system|'''<nowiki>=KH</nowiki>''' - Transformer system]] > Grouping introduced (2023-04).
+<div align="right">''... [[Structural changes|all changes]]''</div>
-*[[Function Bosch Facility#HG - Power supply system|'''<nowiki>=HG</nowiki>''' - Power supply system]] > Grouping introduced (2023-04).
+</div>
-*[[Functional assignment Bosch Facility#H - Cooling and/or heating system|'''<nowiki>==H</nowiki>''' - Cooling and/or heating system]] > Grouping introduced (2023-04).
+</div>
-*[[Function Bosch Facility#KC - Filter system|'''<nowiki>=KC</nowiki>''' - Filter system]] > Grouping introduced (2022-10)
+<!-- flex-item 2 -->
-*[[Function Bosch Facility#HF - Ventilation supply system|'''<nowiki>=HF</nowiki>''' - Ventilation supply system]] > Grouping introduced (2022-10).
+<div style="flex: 1 1 0%; text-align: left">
-*[[Function Bosch Facility#JJ - Air distribution system|'''<nowiki>=JJ</nowiki>''' - Air distribution system]] > Grouping introduced (2022-10)
+<div>
+=== Further instructions ===
+*[[Cabinets Bosch Facility|Specifications for control cabinets]]
+*[[Basic project EPLAN 2023 Bosch Facility|Basic project EPLAN 2023]]
+</div>
+</div></div>
 </div></div>
 </div>
@@ Zeile 96: / Zeile 116: @@
 <!-- flex-item 2 -->
 <div style="flex: 1.1 1 0%; text-align: left">
-<div class="container bosch">
+<div class="container bosch" style="margin-bottom: 0px; padding-top: 0px;">
 == Bosch Equipment Identification Key ==
@@ Zeile 114: / Zeile 134: @@
 </div>
-<div class="container boschfile">
+<div class="container boschfile" style="margin-bottom: 0px; padding-top: 0px;">
 == Bosch file naming convention ==
@@ Zeile 124: / Zeile 144: @@
 *[[Installation site Bosch Facility|Installation site]] (<nowiki>++</nowiki>)
 *[[Functional assignment Bosch Facility|Functional assignment]] (<nowiki>==</nowiki>)
-*[[Function Bosch Facility|Function]] (<nowiki>=</nowiki>)
+*[[Document type Bosch Facility|Document type]]
-*[[Document type Bosch Facility|Document type]] (<nowiki>&</nowiki>)
 *[[Grid square reference Bosch Facility|Grid square reference]]
 *[[Contractor Index Bosch Facility|Contractor Index]]
 *[[Free text Bosch Facility|Free text]]
-*[[Page Bosch Facility|Page]] (<nowiki>/</nowiki>)
 '''Attribute'''
 *[[Status Bosch Facility EN|Status]]
@@ Zeile 147: / Zeile 165: @@
 == [[File naming convention Bosch Facility|File naming convention]] ==
+{{#lst:File naming convention Bosch Facility|Note}}
 === Definition ===
@@ Zeile 154: / Zeile 174: @@
 {{#lst:File naming convention Bosch Facility|Example}}
-== Article status ==
+== EPLAN-Template ==
+=== Documentation ===
+*[[Basic project EPLAN Bosch Facility]]
+*[[:Kategorie:EPLAN Templates Bosch|EPLAN Templates Bosch ''(Category)'']]
+=== eVIEW ===
+{{Bosch EPLAN Template}}
+== Applied standards ==
+'''Document type'''
+*[[EN 61355]] Rules and tables for classification
+'''Structuring'''
+*IEC 81346-1 General rules <font color="#FF0000">Draft</font>
+*[[IEC 81346-2 EN|IEC 81346-2 Classification of objects and identification letters for classes <font color="#FF0000">NEW: 2020-10</font>]]
+**[[IEC 81346-2 Classification scheme for inherent function of objects]]
+**IEC 81346-2 Classification of rooms
+*ISO 81346-12 Buildings and technical building equipment
+**ISO 81346-12 Functional system classes#Classes of functional systems based on inherent functions
+**ISO 81346-12 Functional system classes#Classes of technical systems based on inherent functions
+'''Data point'''
+*DIN EN 61175 Marking of signals
+== Status ==
 <div class="flex start">
@@ Zeile 185: / Zeile 233: @@
 </div></div>
-== Applied standards ==
+== Definitions ==
-'''Document type'''
-*DIN EN 61355 Rules and tables for classification
-'''Structuring'''
+<section begin="Definitions" />
-*IEC 81346-1 General rules <font color="#FF0000">Draft</font>
+*Bosch
-*IEC 81346-2 Classification of objects and identification letters for classes <font color="#FF0000">NEW: 2020-10</font>
+**'''EIK''' = Equipment identification key
-**[[IEC 81346-2 classification scheme for inherent function of objects]]
+**'''FNC''' = File naming convention
-**IEC 81346-2 Classification of rooms
+* Structure (standards)
-*ISO 81346-12 Buildings and technical building equipment
+**'''Installation site <nowiki>(++)</nowiki>''' = This indicator block is used to identify local locations.
-**ISO 81346-12 Functional system classes#Classes of functional systems based on inherent functions
+**'''Mounting location <nowiki>(+)</nowiki>''' = This indicator block is used to identify the installation locations of technical objects.
-**ISO 81346-12 Functional system classes#Classes of technical systems based on inherent functions
+**'''Functional assignment <nowiki>(==)</nowiki>''' = This indicator block is used for function-related structuring from the point of view of the interaction (dynamic effect) of technical objects. It is used to identify relationships between functions, technical equipment and operating resources.
+**'''Function <nowiki>(=)</nowiki>''' = This indicator block is used for function-related structuring from the perspective of task and purpose (static tasks) of the technical objects.
+**'''Product <nowiki>(-)</nowiki>''' = This indicator block is used for product-oriented labeling of electrical and mechanical objects.
+* Terms (standards)
+**'''Aspect''' = Specified way of viewing an object.
+**'''Identifikator''' = Attribute that is assigned to an object in order to distinguish it unmistakably from other objects in a defined scope.
+**'''Referenzkennzeichen''' = Identifier of a specific object, formed in relation to the system of which the object is part, based on one or more aspects of the system.
+**'''Structure''' = Organization of relations among objects of a system describing constituency relations (consist-of/is-a-part-of).<section end="Definitions" />
-'''Data point'''
+== See also ==
-*DIN EN 61175 Marking of signals
 == Weblinks ==